0531-68788899

常见问题

首页>>新闻中心>>常见问题>>汽车保养中使用什么修理工具?
联系我们
济南润奥奥迪专修

联系人:王经理

电话:15066665099

网址:www.sdrunao.com

地址:济南市历城区花园东路与奥体西路交叉口往西200米

汽车保养中使用什么修理工具?

来源:http://www.jnrunao.com/ 日期:2020-04-14 发布人:admin
  汽车维修中常用的专用工具有火花塞套筒、活塞环操纵钳、气门弹簧操纵钳、黄油枪、千斤顶等。我相信这些名字你应该很熟悉,我想解释一下这些工具,希望能对你有所帮助。
  The special tools commonly used in automobile maintenance include spark plug sleeve, piston ring control pliers, valve spring control pliers, grease gun, Jack, etc. I believe you should be familiar with these names. I'd like to explain these tools. I hope they can help you.
  (一)火花塞套筒。用于拆卸发动机火花塞的火花塞套。内六角对边尺寸为22~ 26mm,可折叠14mm和18mm火花塞;内六角对边17mm,用于折叠10mm火花塞。
济南奥迪专修
  (1) Spark plug socket. Spark plug sleeve for removing engine spark plug. The sizes of the opposite sides of the inner hexagon are 22-26mm, which can be folded into 14mm and 18mm spark plugs; the sizes of the opposite sides of the inner hexagon are 17mm, which can be used to fold the 10 mm spark plugs.
  (二)活塞环装卸钳。活塞环装卸钳用于发动机活塞环的装卸,以避免活塞环受力不均而拆卸。使用时,操作活塞环的钳子卡住活塞环的开口,轻握,慢慢收缩,活塞环慢慢打开,活塞环进入或出活塞环的沟槽。
  (2) Piston ring handling pliers. The piston ring loading and unloading pliers are used for loading and unloading the engine piston rings, so as to avoid the disassembly of the piston rings due to uneven stress. When in use, the pliers operating the piston ring will clamp the opening of the piston ring, hold it gently and contract it slowly. The piston ring will open slowly and the piston ring will enter or exit the groove of the piston ring.
  (三)气门弹簧装卸钳。车辆维修使用气门弹簧卸料钳搬运气门弹簧。使用时,将卡爪收缩到更小位置,将卡爪插入阀门弹簧座下,然后旋转手柄。将左手掌向前用力压紧,使夹紧口靠近弹簧座,上下气锁锁(销)片后,将阀弹簧手柄向相反方向旋转,取出装卸钳子。
  (3) Valve spring handling pliers. The vehicle maintenance uses the valve spring unloading pliers to move the radial valve spring. When in use, retract the claw to the minimum position, insert the claw under the valve spring seat, and then rotate the handle. Press the left palm forward to make the clamping mouth close to the spring seat. After the upper and lower air lock (PIN) plates are installed, rotate the valve spring handle in the opposite direction and take out the loading and unloading pliers.
  (四)黄油枪。注脂枪用于注脂各润滑点,由喷嘴、压力阀、柱塞、进油孔、杆头、杠杆、弹簧、活塞杆组成。使用黄油枪时,将黄油放入油缸中以排出空气。装修后,拧紧端盖使用。当向喷嘴中加入润滑脂时,正喷嘴不应歪斜。如果没有,停止灌装,检查喷嘴是否堵塞。
  (4) Butter gun. The grease gun is used for each grease injection point, which is composed of nozzle, pressure valve, plunger, oil inlet hole, rod head, lever, spring and piston rod. When using the grease gun, put the grease into the cylinder to exhaust the air. After decoration, tighten the end cover for use. When lubricating grease is added to the nozzle, the positive nozzle shall not be skewed. If not, stop filling and check whether the nozzle is blocked.
  (五)千斤顶。千斤顶有螺旋千斤顶、液压千斤顶和液压升降机。液压千斤顶常用在汽车上。千斤顶的起重量有3吨、5吨、8吨等。液压千斤顶是用来提升汽车和其他重物的。其结构由顶块、螺杆、储油筒、油缸、摇臂、油压柱塞、柱塞筒、进出油阀、油阀、螺塞、壳体等组成。使用汽车维修千斤顶前,用三角木垫车;在软路面上使用时,应在千斤顶下垫木。起吊时,千斤顶应与重物垂直;在保护好物品和物品掉落之前,不要在车下工作。使用千斤顶时,应先将开关旋紧,将千斤顶放到位,按下千斤顶顶部的把手,然后提起重物。当千斤顶掉落时,慢慢地拧开开关,重量就会下降。
  (5) Jack. Jacks are screw jacks, hydraulic jacks and hydraulic elevators. Hydraulic jacks are often used in cars. The lifting capacity of the jack is 3T, 5T, 8t, etc. Hydraulic jacks are used to lift cars and other heavy objects. Its structure is composed of top block, screw, oil reservoir, oil cylinder, rocker arm, oil pressure plunger, barrel, inlet and outlet valve, oil valve, plug, shell, etc. Before using the car maintenance jack, use the triangle wood to pad the car; when using on the soft road surface, use the wood under the jack. When lifting, the jack shall be perpendicular to the heavy object; do not work under the vehicle before protecting the object and dropping the object. When using the jack, first tighten the switch, put the jack in place, press the handle on the top of the jack, and then lift the heavy object. When the jack falls, slowly turn on the switch and the weight will drop.
  以上是济南奥迪专修小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.jnrunao.com
  The above is the relevant content introduced by Jinan Audi specialized minor editor. To learn more, please visit the website: http://www.jnrunao.com
此文关键词: 济南奥迪专修  

推荐阅读/ Recommended reading

汽车是现在交通主要代步工具,它为人们的生活减少了不必要的时间,使我们生活中的伙伴,那对于汽车车窗发生响声的故障我们该如何处理呢?下面就跟随小编一起来看看解决方法有哪些?

汽车离合器需要注意的8个方面 2020-07-03
汽车空调制冷循环的基本过程 2020-06-15
汽车发动机到底是什么样的结构呢? 2020-06-10
汽车方向盘是什么材料制成的? 2020-06-08

鲁公网安备 37010202001813号