0531-68788899

修车知识

首页>>新闻中心>>修车知识>>汽车轮胎的螺丝是按哪个方向拧?
联系我们
济南润奥奥迪专修

联系人:王经理

电话:15066665099

网址:www.sdrunao.com

地址:济南市历城区花园东路与奥体西路交叉口往西200米

汽车轮胎的螺丝是按哪个方向拧?

来源:http://www.jnrunao.com/ 日期:2020-06-30 发布人:runao
一般来说,小汽车的轮胎螺丝拧松是逆时针方向的,把左手按在对着轮胎的方向、右手握住扳手往上抬起来,螺丝就松了。即逆时针方向为拧松,顺时针方向为拧紧。大货车的轮胎螺丝左右侧方向不一样,左边(驾驶位)的是倒牙、右侧是顺牙,即按车子前进滚动方向拧是上紧、往倒车方向拧是松开。
Generally speaking, the tire screw of a car is unscrewed in a counterclockwise direction. Press the left hand against the center of the tire and hold the wrench in the right hand to lift it up. The screw will be loose. That is, anticlockwise for loosening, clockwise for tightening. The left and right directions of tire screws of large trucks are different. The left side (driver's seat) is inverted teeth, and the right side is along the teeth. That is, according to the forward rolling direction of the car, it is tightened, and the reverse direction is loosening.
小汽车的轮胎螺丝松动是逆时针方向的:大货车的轮胎螺丝左右侧方向不一样的,左边(驾驶位)的是倒牙、右侧是顺牙,即按车子前进滚动方向拧是上紧、往倒车方向拧是松开。
The looseness of the tire screw of the car is counter clockwise: the direction of the left and right side of the tire screw of the truck is different. The left side (driver's seat) has inverted teeth, and the right side is clockwise. That is to say, the screw should be tightened according to the vehicle's forward rolling direction, and loosened when it is turned in the reverse direction.
济南润奥专修
换轮胎注意事项
Precautions for changing tires
1、拆轮胎,在拆卸轮胎的时候,因为上面有固定螺丝,所以要注用力方向,即逆时针方向为拧松;顺时针方向为拧紧。之后就要注意使用千斤顶了,注意一定要将千斤顶放在车底两侧放置的千斤顶的卡槽内,避免发生意外。
1. When removing the tire, because there are fixing screws on it, the direction of force should be noted, that is, anticlockwise is to loosen; clockwise is to tighten. After that, pay attention to the use of the jack, pay attention to the jack must be placed on both sides of the car bottom jack slot, to avoid accidents.
2、检查,车主在换轮胎之前记得一定要检查所更换的轮胎是否正常,更好对所要更换的轮胎做一个简单地检查更好不过了,以免给车主带来不必要的安全隐患。
2. Check: before changing the tire, the owner must check whether the replaced tire is normal or not. It is better to simply check the tire to be replaced, so as not to bring unnecessary safety risks to the owner.
3、顺序,更换轮胎的时候,要注意操作顺序,记得在拧螺丝时不要按照顺时针或逆时针将螺丝依次拧上,而是要按照对角线的顺序来拧螺丝,固定轮胎的是五颗螺丝,建议先用对角线的方式拧上四颗,之后再拧上第五颗螺丝,而在拧螺丝时更好每颗螺丝拧的圈数保持一致,这样做的目的为的是保证螺丝受力均匀。
3. When changing a tire, pay attention to the operation sequence. Remember to turn the screws in a diagonal order instead of clockwise or anticlockwise. Five screws are used to fix the tire. It is recommended to screw four screws diagonally first and then the fifth screw. It is better to ensure the number of turns of each screw when screwing The purpose of this is to ensure that the screws are evenly stressed.
此文关键词: 济南奥迪专修  

推荐阅读/ Recommended reading

轮胎磨损主要是轮胎与地面间滑动产生的磨擦力造成的。汽车起步、转弯及制动等行驶条件的不断变化,转弯速度过快、起步过急、制动过猛,轮胎的磨损就快。

安全气囊使用过程中需要的注意事项? 2020-07-31
汽车洗车需要注意的几个误区? 2020-07-20
汽车维修保养小窍门 2020-07-08
汽车轮胎的螺丝是按哪个方向拧? 2020-06-30

鲁公网安备 37010202001813号