0531-68788899

公司新闻

首页>>新闻中心>>公司新闻>>汽车保险杠裂如何维修?
联系我们
济南润奥奥迪专修

联系人:王经理

电话:15066665099

网址:www.sdrunao.com

地址:济南市历城区花园东路与奥体西路交叉口往西200米

汽车保险杠裂如何维修?

来源:http://www.jnrunao.com/ 日期:2020-08-21 发布人:runao
驾驶车辆上路,多多少少都会遇到一些小刮蹭,而保险杠是受损机率的部件之一,当汽车后保险杠裂了能修复吗?今天就来说说汽车保险杠裂了怎么修的具体方法。
Driving a vehicle on the road, more or less will encounter some small scrapes, and the bumper is one of the components with the highest probability of damage. When the rear bumper of the car is cracked, can it be repaired? Today, let's talk about how to repair the broken bumper.
1、更好购买一套保险杠修复工具,主要包含特制电烙铁、修补胶条、不锈钢修补网、塑料清洗液、单动打磨机、包含6 mm钻头的气动钻、剪刀以及銅刷等部件。
1. It is better to purchase a set of bumper repair tools, mainly including special electric iron, repair adhesive strip, stainless steel repair mesh, plastic cleaning fluid, single acting grinder, pneumatic drill with 6 mm drill bit, scissors and copper brush.
2、对于保险杠穿孔修补,先对保险杠周边打磨(注意不要使用过粗的砂纸,可以使用180#的砂纸配合单动打磨机),其目的是将损伤部位周围的油漆去除掉,然后使用压缩空气对打磨部位进行吹尘处理。
2. For the repair of bumper perforation, first polish the periphery of bumper (pay attention not to use coarse sandpaper, use 180 ᦇ sandpaper combined with single action grinder). The purpose is to remove the paint around the damaged part, and then use compressed air to blow dust on the polished part.
3、然后使用塑料清洗液喷涂于打磨部位,去除表面灰尘和杂质,然后剪取适合大小的不锈钢修补网,填补在保险杠裂缝或孔洞处。
3. Then spray the plastic cleaning solution on the polished part to remove the dust and impurities on the surface, and then cut the stainless steel repair mesh of suitable size to fill the cracks or holes in the bumper.
4、然后使用专用电烙铁加热将不锈钢修补网的四角在保险杠上进行初步固定,在进行加热固定的同时,使用剪刀等工具进行辅助按压,防止不锈钢修补网在加热固定后向上翘起。这样可以将将不锈钢修补网的边缘按顺序全部植入到保险杠穿孔损伤的部位。


4. Then, the four corners of the stainless steel repair net are initially fixed on the bumper by using a special electric iron. At the same time, scissors and other tools are used for auxiliary pressing to prevent the stainless steel repair net from warping upward after heating and fixing. In this way, the edges of stainless steel repair mesh can be implanted into the damaged parts of bumper in sequence.
5、使用填充修补胶条和原子灰操作,这样就不会露出不锈钢修补网了,在使用压缩空气将其吹冷却,冷却后可以进行打磨和吹尘处理。这样反复检查和填充修补胶条再打磨操作后,达到满意程度就可以交给钣喷人员进行后续喷漆处理,如果自己修复,也可以自行喷漆,但容易存在色差。
5. The stainless steel repair mesh will not be exposed by filling repair adhesive tape and atomic ash. After cooling, it can be polished and dusted. In this way, after repeatedly checking and filling the repair adhesive tape, and then grinding the operation, it can be handed over to the sheet spraying personnel for subsequent painting treatment. If the repair is done by yourself, you can also spray paint by yourself, but it is easy to have color difference.
此文关键词: 济南奥迪维修  

推荐阅读/ Recommended reading

说到开车,方向盘是驾驶员接触更多的地方,但是你知道方向盘除了控制汽车方向之外还可以干什么吗?千万不要小看它,很多时候,它在悄悄的向你传达你的爱车可能存在的故障。

宝马为什么要使用防爆轮胎? 2020-10-03
细节//汽车方向盘还可以做什么? 2020-09-23
汽车音响出现故障该如何进行处理? 2020-09-17
汽车油箱出现气体声音的原因是什么? 2020-09-07

鲁公网安备 37010202001813号